TE Connectivity (TE) is unveiling the LUMAWISE Drive LED holder Type Z50 for
chip-on-board (COB) LEDs. The new LUMAWISE Drive LED holder Type Z50, used
in track and spot lighting, integrates the holder and driver into a single package
that offers lighting designers the possibility to develop compact, better-looking,
and more cost-effective lighting products.
TE’s LUMAWISE Drive LED holder Type Z50 is well-suited for track and spot
lighting because it integrates a 48VDC powered constant-current LED driver into
the same form factor as TE’s popular 50 mm diameter Zhaga-compliant range
of LUMAWISE LED holders for COB LEDs. Until recently, most LED drivers have
been housed in separate boxes, often larger than the lamp itself, mounted to
the side of the luminaire and remote to the COB light source. This configuration
required wiring between the light source and driver, creating design and
manufacturing complexity. TE’s new holder reduces that complexity and allows
more flexibility for lighting design.
For more information, visit www.te.com.
Industrial Networking Solutions Provide Reliable Connections
In order to minimize such unexpected downtimes and provide reliable connections, Mencom now offers a wide range of
industrial Ethernet switches such as Managed, Unmanaged, Gigabit, Harsh Environment, and EN50155 Certified Switches.
They also offer Secure Routers, Media converters, Modbus Gateways/Power Supplies, and Serial Device Servers.
Mencom networking solutions provide prolonged Mean-Time-Between-Failure (MTBF) so that in an event of link or device
failure, Smart-Redundancy features will detect the flaw, relay the cause back to the control center, and automatically recover to
provide continuous operation.
They are also designed with embedded
isolation to withstand the harshest
interference and susceptibility without
suffering fatal damage or generating
noise. In addition, Ethernet Ring
Protection Switching (ERPS), Rapid
Spanning Tree Protocol (RSTP), or Media
Redundancy Protocol (MRP) ring settings
can resume the operation and network
connectivity immediately if a network
switch fails or communication link is
For more information, visit
Configurations include a simple on/off
model, a 0 to 10V dimmable type, and a
version with Digital Addressable Lighting
Interface (DALI) dimming.
They are designed to withstand the harshest
industrial-grade electromagnetic interference
The Industry Leader in Test Point Technology
for More Than 70 Years
CORPORATION c c
Components Corporation’s signature line of printed circuit board
test points delivers top-fight performance and cost-efciency.
6 Kinsey Place, Denville, NJ 07834-2692
DESIGNED FOR VALUE.
VALUED FOR PERFORMANCE.
• Cost-efective, time-saving
solution for PCB test
• Mission critical performance
in the harshest of test
• Broad range of product
oferings for specifc design